How to Do a Broken Car Key Repair You're in a hurry to get your work done and jam your keys into the ignition You try to turn the key, but it snaps in the lock There are some things you can do to solve the issue before contacting an experienced locksmith Here are some quick fixes Super Glue 1 Call a Locksmith A broken key in the lock is among the worst things a car owner could experience This is especially frustrating if it occurs while the driver is hurrying to get somewhere or to drop off the ***** In such a situation, it is important to act quickly and attempt to get the key out of the way It is best to call an expert locksmith for this job as they can use the appropriate tools to remove the broken key without harm the lock Many people look around their car for something small and rigid like a paperclip, or toothpick, but this typically won't work since it is too thick to enter the lock A much better solution is to find a pair of tweezers as these are quite thin and easily reach the key hole inside the lock They should be strong enough to grasp the broken piece of a key and pull it out If you don't own tweezers, it could be worth searching for a set that is sold at auto parts stores These are flat, narrow and have tiny hooks They can be put into the keyhole and then grasp the broken piece of the key Another possible solution is to find a magnetic key hook that can be affixed to the metal inside the lock and then pull it out This isn't always the best option because it could be caught in the lock and cause further damage to it In this case, it is best to contact locksmith Some people will try to glue the two pieces of their car key that have snapped together using superglue, thinking that it can aid them in get it out of the lock This could be risky since the metal pieces may tangle and break later It is also important not to turn the key, as this can cause further damage to the lock or ignition cylinder It is better to call an expert locksmith who will be ready to remove the broken key and make an immediate replacement 2 Drill a hole Even with a spare key, you might not be able to access your vehicle if the key breaks inside the lock In these instances drilling the lock is the most effective option The first step is to make sure that the key hole is set to accept a standard tumbler car key If it's not then you won't be able to remove the pins and cause damage to the lock's door or internal mechanism It is important to note that you will drill through the outer layer of plastic as well as an inner metal layer A small drill bit is sufficient to cut through these layers, but it is important to be sure to not go any deeper than that In the event of drilling too deep, it could cause damage to the wiring harness or cause the drill to snag Wearing a mask or other protective equipment is recommended when using drilling This will prevent dust and dirt from getting into your respiratory system It is also recommended to have a pair of pliers and tweezers available in case the damaged key is sticking out of the lock If there is enough of the key sticking out to be able to grasp with tweezers or pliers, this could be sufficient to get it out of the lock If not, you'll have to use an instrument like this to wedge it in the lock, and then turn it towards the key to grasp it and remove it 3 Drill a Nail You may be left in limbo if you break your key in half There are fortunately some methods to fix it, without having to pay for locksmith The first option is to use a nail or screw They can be found in your home or in a hardware store However, it is best to look for a nail that is as thin and long as possible This way, you can place it into the hole, and then use epoxy to connect the two parts together It is also good to make sure the back of the nail is flat This will help it to fit in the cut slot of the key This will prevent it from moving around and possibly breaking again in the future 4 https//wwwg28carkeyscouk/car-key-repairs-near-me/ Glue Many motorists opt for DIY hacks, like using super glue, to repair a damaged or broken key This is a dangerous method You could end up damaging the lock and needing to spend more money on finding a replacement at the dealer or a locksmith You need to check the broken keys first to ensure they're the same size This is vital to ensure that the pieces will be aligned properly and the key will fit into the lock once they have been bonded Then, using a piece fine-grit paper or a metal filing, smooth the edges of the damaged pieces This will help the glue bond better and reduce the chances of a key falling loose in the future After you have polished the edges of the damaged key then apply a small amount of super glue to one of the ends Only apply tiny amounts of super glue, since too much can make the key too thick It will then be difficult to fit into the lock After lining up the two pieces of the broken key and pressing them together, you can press them After a short time the glue will begin to set and join to the key pieces Another household item that can be used to remove a damaged car key is a bobby pin, which can be shaped into a pick-like tool, then placed inside the lock This technique is particularly helpful when the damage is located in or close to the keyway or ignition hole Another thing to remember is that if the broken car key is equipped with electronic components that require a new key cut from the dealership or a professional locksmith The key must be reprogrammed using a new code, and the chip inside the key needs to be changed In contrast, if only the metal or shell of the key is damaged, it usually just requires the cutting of a new key and doesn't require any replacement or reprogramming of the electronic components