Tree removal can be extremely dangerous and even life-threatening It is never recommended to eliminate a tree all on your own unless this can be a small one that you're confident you can handle safely Otherwise, tree removal ought to be left in the hands of professionally-trained and equipped tree service contractors For those who have a tree on your property that's fairly small, but needs to be removed, you can possible do it yourself with the right tools, knowledge, and planning
 
 Tree Removal Preparation
 
 Proper preparation for small tree removal involves gathering all of your needed supplies, and also, a comprehensive inspection of the tree Look to see if the tree leans one way or another, and plan an escape route in case it generally does not fall how you expect it to fall Also, examine whether or not you can find any obstacles in any direction of the tree, including vehicles, structures, along with other trees When you are sure there's enough safe clearance for the tree to fall, then you can move ahead to gathering your equipment and tools This includes
 
 Safety Gear Utility gloves, goggles, hard hat, steel toe boots, etc
 Chainsaw
 Ax or Hacksaw
 Ladder
 Rope
 Wedges
 First Aid Kit
 TO ELIMINATE a Tree
 
 Once you have all of your equipment and supplies, you will get started removing the tree First, use your ax to knock on the bark several times, and in a few different places, to understand how solid or hollow the tree is Getting a less dense area to cut will undoubtedly be easier Next, plan which side of the tree you would like to make your cut Look to see where the tree naturally leans; it is best to cut a tree in the direction in which it really wants to naturally fall Be sure  https//northlondontreesurgeoncouk/  where the tree drops is level so the tree does not roll or bounce after it falls
 
 <img width="300" src="https//masonstreesurgerycouk/wp-content/uploads/2020/06/tree-surgeon-pruning-conifersjpg">
 
 Make a horizontal cut at hip-height, and about 1/3rd into the tree Do this privately of the tree where you want it to fall If you want the tree to fall to the right, you must cause you to cut on the same side so it falls inward, towards the cut The tree will fall perpendicular to your horizontal cut Your next cut should create a wedge into the tree So make the next cut at an angle from the initial cut It should appear to be a lemon wedge
 
 Your third cut is called a back cut, and is should be made on the opposite side of one's wedge cut This cut will make the tree fall over on the side of one's wedge cut Ensure it is about 15 inches above the wedge cut, and as thick as possible You can even use a wedge to prevent the tree from settling onto the chainsaw Add more wedges as necessary before tree begins to fall Then run But usually do not turn your back on the tree as it falls